Specializing in the production of various stainless steel pipes, plates, coils, rods, pipe fittings, high nickel alloy steel products, high temperature resistant products
PRODUCTS
Reinforcing Steel Mesh
Category:
Reinforcing Steel Mesh
keywords :
Reinforcing Steel Mesh
Product Description
Produced by resistance welding longitudinal and transverse steel wires at intersections, forming a rigid grid. Features precise spacing, consistent weld strength, high tensile performance, and easy installation. Available steel grades: HRB400, HRB400E, HRB500, CRB550, CRB600H, Q195, Q235, and ASTM A615 Grade 60. Wire diameter: 4mm – 16mm. Grid spacing: standard 100×100mm, 150×150mm, 200×200mm; custom spacing available (50–400mm). Mesh width: 1.0m – 2.5m. Mesh length: 2.0m – 12.0m. Sheet type: flat mesh or bent (U-shaped, L-shaped) for specific structural needs. Roll type: for smaller diameters (4–8mm) available as rolls up to 50m long. Weld shear strength: ≥ 0.3 × nominal tensile strength of the wire. Surface finish: plain black (as-welded), galvanized, or epoxy-coated for corrosion resistance. Meets ASTM A185/A497, BS 4483, GB/T 1499.3, or JIS G3552 standards. Custom sizes, spacing, and shapes available upon request.
Parameter
| Product Name | Welded Reinforcing Rebar Mesh |
| Wire Diameter | 1.2mm-12mm and other sizes are also available. |
| Panel Size | 2m*6m and other sizes are also available. |
| Mesh Size | 2*2cm, 2*3cm, 3*5cm, 4*4cm, 8*8cm, 10*10cm, 30*30cm and other sizes are also available. |
| Hole Shape | Rectangles, squares and other shapes accept customization. |
| Application | Highway, bridge deck pavement, airport runway, house building, industry, agriculture, aquaculture, building, communication and transportation and mineral extraction,etc. |
| Surface Treatment | Hot dipped galvanized, galvanized + powder coated |
| Processing Service | Bending, Welding, Decoiling, Cutting, etc,. |
Application description
Widely used in concrete slab reinforcement (floors, pavements, tunnel linings), wall reinforcement (concrete block walls, plastering), bridge decks, precast concrete products (panels, pipes), foundations, and road construction. Also suitable for fencing, animal cages, and industrial shelving. The welded grid provides uniform load distribution and crack control, reducing labor compared to loose rebar placement.
Production description
Steel wire coils are uncoiled, straightened, and cut to specified lengths. Longitudinal wires are fed continuously, while transverse wires are positioned at preset intervals by a cross wire feeder. Both sets of wires pass through multi-electrode resistance welding heads, where electrical current and pressure fuse them at each intersection. The welded mesh is then trimmed to width, cut to length (or rolled for small diameters), and inspected for weld strength, spacing accuracy, and surface quality.
Shipping Packaging
For export, welded wire mesh sheets are stacked flat with interleaved paper or plastic separators, bundled with steel straps, packed on ISPM-15 pallets, and fitted with edge protectors. Rolled mesh is wrapped with VCI paper and moisture-proof polyethylene. Labels include grade, wire diameter, spacing, dimensions, and quantity for safe sea freight.
Why Choose Us?
1.Factory Strength:Direct manufacturer with automated resistance welding lines, ensuring consistent weld strength, precise wire spacing (±1mm), and high production efficiency for wire diameters 4–16mm and sheet/roll formats.
2.Quality Assurance:Strict control of wire tensile strength, weld shear strength (≥0.3×wire tensile), grid dimensions, and surface finish; compliant with ASTM A185/A497, BS 4483, GB/T 1499.3, JIS G3552.
3.Certifications & Reports:Mill test certificates (MTC) with each shipment; third-party inspections (SGS, BV) and weld strength test reports available upon request.
4.Customization & Service:Wide grade range (HRB400–HRB500, CRB550, Q195–Q235, ASTM A615), wire diameters 4–16mm, grid spacing 50–400mm, sheet or roll type, custom lengths/widths, and galvanized/epoxy coating options with fast lead times.
5.Export Packaging:Flat sheets stacked with interleaved separators + steel strapping + ISPM-15 pallets + edge protectors; rolled mesh wrapped with VCI paper + moisture-proof polyethylene for safe sea freight and damage-free delivery.
FAQ
1. How to store welded wire mesh to prevent rust and distortion?
Store on dry, level ground on wooden pallets or concrete blocks, keep original wrapping intact. For black (uncoated) mesh, store indoors or under waterproof cover. Avoid stacking heavy loads that may bend the mesh. Surface rust on reinforcing mesh is generally acceptable for concrete embedding.
2. Can welded wire mesh be cut or bent on site?
Yes. Mesh sheets can be cut with bolt cutters, rebar shears, or angle grinders. Bending can be done using a manual or hydraulic bender. For precise bends (corners, U-shapes), we also offer custom pre-bent mesh to reduce site work.
3. What is the difference between plain (black) and galvanized welded wire mesh?
Plain black mesh is economical and suitable for embedded concrete reinforcement where corrosion protection is provided by concrete cover. Galvanized mesh offers corrosion resistance, ideal for exposed applications (fencing, cages, plastering) or structures in humid, coastal, or chemical environments.
Customer Reviews
FACTORY APPEARANCE
HONORS AND QUALIFICATIONS
The company has sufficient inventory and complete varieties and specifications. Special materials and specifications are produced according to customer requirements and exported to Asia, the Middle East, Europe and other countries and regions. We have our own quality management systems: ISO9001, ISO14000, OHSAS18001 standards.
CUSTOMER VISIT
GET A FREE QUOTE
We understand that our customers value quality and after-sales service most. We consistently adhere to high standards and strict requirements, striving to become your preferred partner.
RELATED PRODUCTS
Get ln Touch Now
Need Assistance? We're Here To Help!
Telephones
Contact Address
Building 1, Wealth No.1 Plaza, Huaiyin District, Jinan City, Shandong Province, China
If you have any questions or need help, please feel free to contact us.
Enter your information and our team will reach out to you shortly.
Copyright : © NUCOR STEEL (SHANDONG) CO., LTD.
