Specializing in the production of various stainless steel pipes, plates, coils, rods, pipe fittings, high nickel alloy steel products, high temperature resistant products
PRODUCTS
Galvanized Steel Wire Rope
Category:
Steel Wire Rope
keywords :
Steel Wire Rope
Product Description
Produced by stranding galvanized steel wires around a central core to form a flexible, high-strength cable. Features excellent corrosion resistance, good fatigue life, smooth surface, and reliable breaking strength. Base steel grades: A, B, or EIP (extra improved plow) steel. Core types: fiber core (FC), independent wire rope core (IWRC), or wire strand core (WSC). Standard constructions: 6×7, 6×19 (6×19S, 6×19W, 6×25F), 6×36, 6×37, 7×7, 7×19, 8×19, 18×7. Diameter range: 1.0mm – 52mm. Lay direction: regular lay, lang lay, or left lay. Surface finish: bright galvanized or hot-dip galvanized (coating weight up to Z300). Tensile strength grades: 1370 MPa, 1570 MPa, 1770 MPa, 1960 MPa. Packaging forms: coils on wooden reels, spools, or cut lengths with seized ends. Pre-stretched or rotation-resistant options available. Meets ASTM A1023/A1024, EN 12385-4, JIS G3525, or GB/T 20118 standards. Custom diameters, constructions, and coatings available.
Parameter
|
Product Name |
Steel Wire Rope |
|
Standard |
AISI, ASTM, DIN, JIS, GB, JIS, SUS, EN, etc |
|
Grade |
200 series：201, 202, 202cu, 204 |
|
Dx51D, Dx52D, Dx53D, DX54D, S220GD, S250GD, S280GD, S350GD, S350GD, S550GD; SGCC, SGHC, SGCH, SGH340, SGH400, SGH440, SGH490,SGH540, SGCD1, SGCD2, SGCD3, SGC340, SGC340 , SGC490, SGC570; SQ CR22 (230), SQ CR22 (255), SQ CR40 (275), SQ CR50 (340), SQ CR80(550), CQ, FS, DDS, EDDS, SQ CR33 (230), SQ CR37 (255), SQCR40 (275), SQ CR50 (340), SQ CR80 (550); or Customer’s Requirement |
|
|
Diameter |
0.3mm-120mm |
|
Surface treatment |
Electro galvanized, Hot dipped galvanized,Stainless steel |
|
Tensile strength |
1400Mpa-1960Mpa |
|
Certification |
ISO9001,SGS, BV, etc |
|
Packing |
Canton box,plastic reel,wooden reel,steel reel,wooden box |
|
Application |
ACSR Core,pulling pole,overhead conductor,Messenger wire, etc. |
Application description:
Widely used in construction hoisting (crane lines, elevator ropes), marine rigging (towing, mooring, fishing nets), mining (haulage ropes, shaft hoisting), agricultural machinery (winch cables, baler twine), transmission lines (guy wires, overhead ground wires), and general industrial lifting. Also suitable for slings, tie-downs, and tow lines. The zinc coating provides effective corrosion protection for outdoor, humid, and mildly corrosive environments.
Production description
High-carbon steel wire rod is drawn to size, then hot-dip galvanized to form a corrosion-resistant coating. The galvanized wires are twisted around a core (fiber or steel) to form strands, and multiple strands are closed together to form the rope. The rope is pre-stretched, inspected for lay length, breaking load, and coating integrity.
Shipping Packaging
For export, galvanized steel wire rope is wound on wooden or steel reels, wrapped with VCI paper and moisture-proof polyethylene, packed in wooden crates or on ISPM-15 pallets, secured with steel straps, and fitted with edge protectors. Labels include grade, diameter, construction, length, and heat number for safe sea freight.
Why Choose Us?
1.Factory Strength:Direct manufacturer with integrated wire drawing, hot-dip galvanizing, stranding, and closing lines, ensuring consistent tensile strength (up to 1960MPa), precise lay length, and uniform zinc coating (Z40–Z300) for diameters 1.0–52mm.
2.Quality Assurance:Strict control of breaking load, coating adhesion, fatigue life, and lay uniformity; 100% break load testing; compliant with ASTM A1023/A1024, EN 12385-4, JIS G3525, GB/T 20118.
3.Certifications & Reports:Mill test certificates (MTC) with each shipment; third-party inspections (SGS, BV) and salt spray test/breaking load reports available upon request.
4.Customization & Service:Wide construction range (6×19, 6×36, 7×7, 7×19, 8×19, 18×7, etc.), core types (FC, IWRC), diameters 1.0–52mm, lay directions (regular, lang, left), tensile grades (1370–1960MPa), and custom cut lengths with fast lead times.
5.Export Packaging:Wound on wooden/steel reels + VCI paper + moisture-proof wrapping + wooden crates/ISPM-15 pallets + steel strapping + edge protectors for safe sea freight and rust prevention.
FAQ
1. How to prevent galvanized wire rope from rusting during storage?
Store on dry, elevated wooden reels or pallets in a well-ventilated area. Keep original moisture-proof wrapping intact. Avoid direct contact with wet ground, acids, or chemicals. For long-term storage, apply light oil or maintain humidity below 60%. Surface white rust (zinc oxide) can be brushed off without affecting rope strength, but red rust indicates coating failure and requires replacement.
2. What is the difference between bright galvanized and hot-dip galvanized wire rope?
Bright (electro-galvanized) wire rope has a thinner, smoother zinc coating suitable for indoor or light-duty applications where mild corrosion protection is needed. Hot-dip galvanized wire rope has a thicker, more durable coating (up to Z300), offering superior corrosion resistance for outdoor, marine, or humid environments. For heavy-duty or continuous salt exposure, hot-dip galvanized is recommended.
3. Can galvanized wire rope be used with pulleys and sheaves?
Yes, but ensure pulleys/sheaves are designed for wire rope (groove diameter = 1.05–1.10 × rope diameter, groove radius properly matched). Avoid using with cast iron or plastic pulleys that can cause abrasion. For frequent bending applications (e.g., cranes, elevators), choose constructions with higher flexibility (6×36 or 8×19) and regularly lubricate the rope to reduce internal friction.
Customer Reviews
FACTORY APPEARANCE
HONORS AND QUALIFICATIONS
The company has sufficient inventory and complete varieties and specifications. Special materials and specifications are produced according to customer requirements and exported to Asia, the Middle East, Europe and other countries and regions. We have our own quality management systems: ISO9001, ISO14000, OHSAS18001 standards.
CUSTOMER VISIT
GET A FREE QUOTE
We understand that our customers value quality and after-sales service most. We consistently adhere to high standards and strict requirements, striving to become your preferred partner.
RELATED PRODUCTS
Get ln Touch Now
Need Assistance? We're Here To Help!
Telephones
Contact Address
Building 1, Wealth No.1 Plaza, Huaiyin District, Jinan City, Shandong Province, China
If you have any questions or need help, please feel free to contact us.
Enter your information and our team will reach out to you shortly.
Copyright : © NUCOR STEEL (SHANDONG) CO., LTD.
