Specializing in the production of various stainless steel pipes, plates, coils, rods, pipe fittings, high nickel alloy steel products, high temperature resistant products
PRODUCTS
Aluminum square bar
Category:
Aluminum Bar
keywords :
Aluminum Bar
Product Description
Produced by hot extrusion or cold drawing from high-quality aluminum alloy billet, followed by heat treatment and straightening. Features light weight, good corrosion resistance, high strength-to-weight ratio, and excellent machinability. Available alloys: 6061, 6063, 6060, 6082, 7075, 2024, 5052, 5083. Shapes: round, square, flat, hexagonal, and octagonal. Diameter (round): 3mm – 300mm. Square size: 3×3mm – 150×150mm. Flat bar: 3×10mm – 20×200mm. Hexagonal bar (across flats): 4mm – 80mm. Length: 2m – 6m (custom up to 8m). Surface finish: mill finish (as-extruded), cold drawn (bright), turned, polished, or anodized. Tolerances: extruded ±0.5mm, cold drawn ±0.05mm, ground ±0.02mm. Temper: O, T4, T5, T6, T651, T6511. Excellent weldability and formability. Meets ASTM B221, EN 755, JIS H4040, or GB/T 3191 standards. Custom lengths, shapes, and surface finishes available.
Parameter
|
Product name |
aluminum rod / aluminum bar |
|
Standard |
AISI, ASTM, DIN, JIS, GB, JIS, SUS, EN, etc |
|
Out Diameter |
2-800mm |
|
Length |
3m,5.8m, 6m, or as required. |
|
Shape |
Circle, square, polygon |
|
Surface finish |
mill, bright, polished, hair line, brush, sand Blast, checkered, embossed, etching, etc |
|
Material |
1050, 1060, 1100, 2A14, 2014-T4/T6, 2024-T4/T351, 2A12-T4/T351, 2A11-T4, 2014-T4/T6, 2017-T4, 2024, 3003, 3103, 3003-H24, 3003-H112, 3A21-H112, 4032, 4047, 5454, 5754, 5056, 5082, 5086, 5052-H32 /H112, 5A02- O/H112, 5A03-O/H112, 5A05- O/H112, 5A06-H112, 5754-H111, 5754-H22 5083-O, 5083-H111, 5083-H1126061, 6060, 6082, 6082-T6, 6063-T6, 6061-T6, 6061-T651, 7075, 7475, 7050-T651, 7050-T7451, 7A04-T6, 7A09-T6, 7075-T6, 7075-T651, 7075-T652 |
|
Temper |
T3-T8 T351-T851 O-H112 |
|
Application |
Construction,Machine decoration and industry |
Application description
Widely used in precision machining (shafts, pins, bushings, gears), aerospace components, automotive parts (pistons, suspension links), marine fittings, electrical connectors, fasteners (bolts, rivets), and structural frameworks. Also suitable for handrails, furniture legs, sporting goods (bicycle crank arms, climbing anchors), and general engineering prototypes. The combination of lightweight, strength, and excellent machinability makes it ideal for both industrial and consumer products.
Production description
Aluminum billet is heated and extruded or cold drawn through a die to achieve the desired shape (round, square, hexagonal, etc.). The bar is then stretched and straightened, heat treated (T4, T5, T6, etc.) to enhance mechanical properties, and cut to length. Optional surface finishing includes turning, polishing, or anodizing. Finished bars are inspected for dimensional accuracy and surface quality.
Shipping Packaging
For export, aluminum bars are bundled with interleaved paper or plastic separators, wrapped with VCI paper and moisture-proof polyethylene, packed on ISPM-15 pallets, secured with steel straps, and fitted with edge protectors. Labels include alloy, shape, dimensions, length, and heat number for safe sea freight.
Why Choose Us?
1.Factory Strength:Direct manufacturer with precision extrusion and cold drawing lines, heat treatment furnaces (T4/T5/T6/T651), and straightening equipment, producing round, square, flat, hexagonal, and octagonal bars with tight tolerances (cold drawn ±0.05mm, ground ±0.02mm).
2.Quality Assurance:Strict control of alloy composition (6061, 6063, 7075, 2024, etc.), mechanical properties (tensile, yield, elongation), hardness, and surface finish; 100% dimensional and visual inspection; compliant with ASTM B221, EN 755, JIS H4040, GB/T 3191.
3.Certifications & Reports:Mill test certificates (MTC) with each shipment; third-party inspections (SGS, BV) and chemical/mechanical test reports (including tensile, hardness, electrical conductivity) available upon request.
4.Customization & Service:Wide alloy range (6060/6061/6063/6082/7075/2024/5052/5083), shapes (round 3–300mm, square 3–150mm, flat 3×10–20×200mm, hex 4–80mm, custom), lengths up to 8m, tempers (O, T4, T5, T6, T651/T6511), and surface finishes (mill, cold drawn, turned, polished, anodized) with fast lead times.
5.Export Packaging:Interleaved paper/plastic separators + VCI paper + moisture-proof wrapping + ISPM-15 pallets + steel strapping + edge protectors + clear labeling for safe sea freight and scratch-free delivery.
FAQ
1. How to store aluminum bars to prevent surface oxidation and scratches?
Store in dry, clean area on wooden pallets or racks, keep original protective wrapping intact. Avoid direct contact with concrete, wet ground, or dissimilar metals (copper, steel) to prevent galvanic corrosion. Use soft separators between layers for polished or anodized bars. For long-term storage, keep indoors and maintain humidity below 60%.
2. What is the difference between 6061 and 7075 aluminum bars for high-stress applications?
6061 offers good strength, excellent weldability, and corrosion resistance, suitable for structural frames, machinery parts, and marine components. 7075 is much stronger (tensile strength up to 570 MPa vs 310 MPa for 6061) but less weldable and less corrosion resistant, ideal for aerospace, military, and high-performance sporting goods where weight-saving and extreme strength are critical.
3. Can aluminum bars be machined (turned, milled, drilled) easily?
Yes. Aluminum is known for excellent machinability. Use sharp carbide tools, proper coolant/lubricant, and moderate speeds. 6061 and 6063 machine well with good chip formation. 7075 is also machinable but more abrasive. Cold drawn or extruded bars provide consistent properties. Avoid excessive heat to prevent material softening. For best surface finish, use polished or cold drawn bars.
Customer Reviews
FACTORY APPEARANCE
HONORS AND QUALIFICATIONS
The company has sufficient inventory and complete varieties and specifications. Special materials and specifications are produced according to customer requirements and exported to Asia, the Middle East, Europe and other countries and regions. We have our own quality management systems: ISO9001, ISO14000, OHSAS18001 standards.
CUSTOMER VISIT
GET A FREE QUOTE
We understand that our customers value quality and after-sales service most. We consistently adhere to high standards and strict requirements, striving to become your preferred partner.
RELATED PRODUCTS
Get ln Touch Now
Need Assistance? We're Here To Help!
Telephones
Contact Address
Building 1, Wealth No.1 Plaza, Huaiyin District, Jinan City, Shandong Province, China
If you have any questions or need help, please feel free to contact us.
Enter your information and our team will reach out to you shortly.
Copyright : © NUCOR STEEL (SHANDONG) CO., LTD.
