Specializing in the production of various stainless steel pipes, plates, coils, rods, pipe fittings, high nickel alloy steel products, high temperature resistant products
PRODUCTS
Copper Coil
Category:
Copper Coil
keywords :
Copper Coil
Product Description
Produced by hot rolling and cold rolling from high-purity copper or copper alloy ingot, then coiled into compact rolls. Features excellent electrical and thermal conductivity, good corrosion resistance, uniform thickness, and high formability. Available materials: pure copper (T2, TP2, C11000, C12200), brass (H62, H65, H68, H70, H85), bronze (QSn6.5-0.1, C51900). Thickness range: 0.1mm – 3.0mm (thin coil), hot rolled coil up to 12mm. Width: 100mm – 1500mm (slit or full width). Coil inner diameter: 300mm, 400mm, 500mm, or 508mm. Coil weight: custom, typically 1–8 tons. Surface finish: mill finish (as-rolled), cold rolled (bright), pickled, polished, or coated. Temper: soft (annealed), half hard, hard. Edge condition: mill edge or slit edge (deburred). Excellent formability for stamping, roll forming, and deep drawing. Meets ASTM B152, EN 1652, JIS H3100, or GB/T 2059 standards. Custom widths, coatings, and tempers available.
Parameter
| Product name | Copper roll / Copper coil |
| Standard | AISI, ASTM, DIN, JIS, GB, JIS, SUS, EN, etc |
| Grade | C10100, C10200, C10300, C10400, C10500, C10700, C10800, C10910, C10920, C10930, C11000, C11300, C11400, C11500, C11600, C12000, C12200, C12300, C12500, C14200, C14420, C14500, C14510, C14520, C14530, C17200, C19200, C21000, C23000, C26000, C27000, C27400, C28000, C33000, C33200, C37000, C44300, C44400, C44500, C60800, C63020, C65500, C68700, C70400, C70620, C71000, C71500, C71520, C71640, C72200, T1, T2, T3, TU1, TU0, TU2, TP1, TP2, TAg0.1 |
| Temper | O-H112; T3-T8; T351-T851 |
| Thickness | 0.3mm~100mm |
| Width | 50mm~2500mm |
| Length | 1000mm~12000mm |
| Surface | Mill finish, polished, anodizing, brushing, sand blasting, powder coating,etc |
| Application | 1)Further making utensil. 2)Solar reflective film 3)The appearance of the building 4)Interior decorating:ceilings,walls,etc. 5)Furniture cabinets 6)Elevator decoraction 7)Signs,nameplate,bags making. 8)Decorated inside and outside the car 9)Household appliances:refrigerators,microwave ovens,audio equipment,etc. 10)The consumer electronics:mobile phones,digital cameras,MP3,U disk,etc. |
Application description
Widely used in electrical and electronic industries (transformer windings, flexible busbars, cable shielding, flexible printed circuits), roofing and flashing (architectural copper), automotive heat exchangers (radiators, condensers), industrial gaskets, solar thermal collectors, and decorative trim. The coil form allows high-speed stamping, roll forming, and deep drawing for mass production. Pure copper coils offer excellent conductivity; brass coils provide strength and corrosion resistance for hardware and decorative applications.
Production description
Copper ingot is hot rolled to reduce thickness, then cold rolled to achieve precise gauge and surface finish. The strip is coiled, annealed to achieve desired temper, and optionally pickled, polished, or coated. The coil is slit to required width, inspected, and packed.
Shipping Packaging
For export, copper coils are wrapped with VCI paper and moisture-proof polyethylene, placed on ISPM-15 wooden pallets or steel skids, secured with steel straps, and fitted with edge protectors and coil protectors. Labels include grade, dimensions, coil weight, and heat number for safe sea freight.
Why Choose Us?
Factory Strength:Direct manufacturer with hot rolling and cold rolling mills, precision slitting lines, and annealing furnaces, producing copper coils in pure copper (T2, TP2, C11000, C12200), brass (H62–H85), and bronze (QSn6.5-0.1, C51900) with thickness 0.1–12mm, width up to 1500mm.
Quality Assurance:Strict control of chemical composition, electrical conductivity (≥97% IACS for pure copper), mechanical properties (tensile, yield, elongation, hardness), and thickness tolerance (±0.02mm); 100% eddy current or ultrasonic testing available; compliant with ASTM B152, EN 1652, JIS H3100, GB/T 2059.
Certifications & Reports:Mill test certificates (MTC) with each shipment; third-party inspections (SGS, BV) and test reports (conductivity, tensile, hardness, coating adhesion for coated coils) available upon request.
Customization & Service:Wide alloy range (pure copper, brass, bronze), thickness 0.1–12mm, custom widths (100–1500mm), coil weights (1–8 tons), tempers (soft, half hard, hard), surface finishes (mill, cold rolled, pickled, polished, coated), and fast lead times.
Export Packaging:VCI paper + moisture-proof polyethylene + ISPM-15 wooden pallets/steel skids + steel strapping + edge/coil protectors + clear labeling for safe sea freight and corrosion prevention.
FAQ
1. How to store copper coils to prevent surface oxidation and edge damage?
Store in dry, clean warehouse on wooden pallets or steel skids, keep original VCI paper and moisture-proof wrapping intact. Avoid contact with concrete, wet ground, acids, or ammonia. For long-term storage, maintain humidity below 60%. Keep coils upright (eye vertical) to prevent distortion. Minor tarnish can be removed with a mild acid dip or abrasive pad before use.
2. Can copper coils be stamped, deep drawn, or roll-formed easily?
Yes. Soft (annealed) temper offers the best formability for deep drawing, complex stamping, and tight radius bending. Half hard and hard tempers are suitable for lighter stamping and roll forming where higher strength is needed. Use proper lubrication and tooling designed for copper to avoid galling or tearing. For best results, request samples for process validation.
3. What is the difference between pure copper, brass, and bronze coils for electrical and decorative applications?
Pure copper (T2, C11000) has the highest electrical conductivity (≥97% IACS), ideal for transformer windings, busbars, and flexible circuits. Brass coils (e.g., H65, H68) offer higher strength, good corrosion resistance, and a gold-like appearance, suitable for decorative trim, radiator tanks, and hardware. Bronze coils (e.g., C51900) provide superior wear resistance and corrosion in marine environments, used for spring contacts and gaskets. Choose based on conductivity, strength, or aesthetics.
Customer Reviews
FACTORY APPEARANCE
HONORS AND QUALIFICATIONS
The company has sufficient inventory and complete varieties and specifications. Special materials and specifications are produced according to customer requirements and exported to Asia, the Middle East, Europe and other countries and regions. We have our own quality management systems: ISO9001, ISO14000, OHSAS18001 standards.
CUSTOMER VISIT
GET A FREE QUOTE
We understand that our customers value quality and after-sales service most. We consistently adhere to high standards and strict requirements, striving to become your preferred partner.
RELATED PRODUCTS
Get ln Touch Now
Need Assistance? We're Here To Help!
Telephones
Contact Address
Building 1, Wealth No.1 Plaza, Huaiyin District, Jinan City, Shandong Province, China
If you have any questions or need help, please feel free to contact us.
Enter your information and our team will reach out to you shortly.
Copyright : © NUCOR STEEL (SHANDONG) CO., LTD.
